AMD RX 7600 graphics card compatibility issues arise.

TL;DR Summary
Some 6+2pin power cables may not fit properly into the connector slot of AMD's reference model of the Radeon RX 7600 due to the backplate cover extending too far, which may block a small bump on some of these power cables. This issue only affects 20% of the cables tested and should not impact native 8-pin power cables. Users can use alternative cables, cable extenders, or remove the backplate entirely to resolve the issue. AMD is planning to sell its MBA reference card later, which was not originally planned.
- Some 6+2pin power cables may not fully fit into Radeon RX 7600 reference card VideoCardz.com
- Best AMD RX 7600 graphics card in 2023 WePC - PC Tech & PC Gaming News
- AMD's Reference RX 7600 Card Doesn't Fit Some 6+2-Pin Connectors Tom's Hardware
- AMD Radeon RX 7600 drops to €259 in Spain, just one day after launch VideoCardz.com
- ASUS Introduces ROG Strix AMD Radeon RX 7600, Dual and Dual V2 Graphics Cards guru3d.com
Reading Insights
Total Reads
0
Unique Readers
1
Time Saved
1 min
vs 2 min read
Condensed
74%
344 → 89 words
Want the full story? Read the original article
Read on VideoCardz.com