Pilot's Seiren: A 3D-Printed Titanium Super Bike.
TL;DR Summary
Dutch titanium specialists Pilot Cycles have unveiled a new 3D-printed titanium road bike, the Seiren, which will cost around €17,000 when it enters full production in October. The frame is made up of three 3D-printed sections, which are then bonded together, and the seat mast is similar to the Trek Madone aero road bike. The walls of each section are only 0.6mm thick, bringing the claimed weight of a size-56cm frame down to 1,150g. The bike is set to go on sale in early 2024.
Reading Insights
Total Reads
0
Unique Readers
1
Time Saved
3 min
vs 4 min read
Condensed
87%
662 → 85 words
Want the full story? Read the original article
Read on BikeRadar