Ploopy Knob: Affordable, Precise, and Customizable Open-Source PC Control Dial
TL;DR Summary
The Ploopy Knob is an open-source, customizable control dial for PCs, powered by a Raspberry Pi microcontroller, designed for functions like volume control and media scrubbing. It is available fully assembled for around $37 CAD, with design files and software open for DIY customization, though high-resolution scrolling may be limited on macOS.
- The Ploopy Knob is an open-source control dial for your PC The Verge
- Open-Source Knob Packed With Precision Hackaday
- This $37 tactile dial for PCs supercharges your scrolling with incredible 0.043-mm precision — Ploopy Knob is a 3D-printed open source project you can also make on your own Yahoo
- Ploopy Knob is a USB-Powered Control Dial for Your PC That Can Be Programmed to do Almost Anything TechEBlog -
- Ploopy Knob is a $37 customizable dial for your computer that runs open source firmware (open hardware) Liliputing
Reading Insights
Total Reads
0
Unique Readers
1
Time Saved
1 min
vs 2 min read
Condensed
83%
306 → 52 words
Want the full story? Read the original article
Read on The Verge